Reminder: TXF stepless gearbox
共有7种型号,功率从0.15KW到9.2KW
There are 7 models, power from 0.15KW to 9.2KW
变速范围:
Speed range:
速比I=3.5(型号:005/080 至010-090)
The ratio of I=3.5 (model: 005/080 to 010-090)
速比I=6(型号:005-010)
The ratio of I=6 (model: 005-010)
速比I=5(涵盖每个型号)
The ratio of I=5 (covering every type)
嗓音低,运转时无震动
Low noise, no vibration during operation
高效率,可双向旋转
High efficiency, bidirectional rotation
可以根据需要在电机的两边安装调速手轮
May according to need to install the motor speed regulating handwheel on both sides of the
速度误差(最大):±0.5%
Velocity error: ± 0.5% (maximum)
速度误差(最小):±0.1%
Velocity error: ± 0.1% (minimum)
调节灵敏度:0.5rpm
Adjust the sensitivity: 0.5rpm
外壳材质(TK-VK-PK-SK):G200
Shell material (TK-VK-PK-SK): G200
灰铸铁(IS0185)
Grey cast iron (IS0185)
外壳材质(TX):铝合金
Shell material: aluminum alloy (TX)
轴材质:合金钢20MnCr5(UNI8550)
Shaft material: alloy steel 20MnCr5 (UNI8550)
内部元件:100Cr6 热处理钢
The internal components: heat treatment of 100Cr6 steel
外壳全部皆涂上Ral 5010深蓝色环氧树脂漆油
Housing all coated with Ral 5010 deep blue epoxy resin paint
Reminder: TXF stepless gearbox
There are 7 models, power from 0.15KW to 9.2KW
The speed range:
The ratio of I=3.5 (model: 005/080 to 010-090)
The ratio of I=6 (model: 005-010)
The ratio of I=5 (covering every type)
Low noise, no vibration during operation
High efficiency, bidirectional rotation
May according to need to install on both sides of the motor speed regulating handwheel
The speed error (maximum): + 0.5%
The speed error (minimum): + 0.1%
Adjust the sensitivity: 0.5rpm
Shell material (TK-VK-PK-SK): G200
Grey cast iron (IS0185)
Shell material: aluminum alloy (TX)
Shaft material: alloy steel 20MnCr5 (UNI8550)
The internal components: heat treatment of 100Cr6 steel
Housing all painted dark blue Ral 5010 epoxy resin paint